home   |   contact upm   |   find upm   |   after sales support

Underbelt Cooling Fans

Heat Exchanger Cooling Conveyor

• Located beneath the 22% open link belt surface to blow ambient air onto product prior to discharge into storage container.

• Quantity of fans depends on belt width and final product temperature required.

• 175mm dia steel die cast aluminium frame with steel impeller.

• Equipped with ball bearing and motor stall protection by temperature sensor with automatic reset.

• 1ph 220v ac power supply.

• Low noise 55 dBA.

• Ambient airflow of 375 m3/h.

SK3217 HEAT EXCHANGER COOLING CONVEYOR

• Located above the belt surface to blow chilled air onto product prior to discharge into storage container.

• Chilled water supply from existing unit.

• Quantity of Units depends on belt width and final product temperature required.

• Unit dimensions are:

  135mm high x 300mm wide x 520mm long

• 1ph 220v 50hz ac power supply 0.6amp.

• Fan airflow of 120 m3/h at +20oC temperature.

  Download details in PDF format

  Download details in PDF format

Contact UPM about Cooling