|
The EdB range of hot air dryers has been developed for the treatment
of all non-hydroscopic thermoplastic materials.
The drying cycle is optimised by a system which recycles all or part of
the return air, relative to the initial percentage moisture content of
the granule.
Although these units have are designed to be installed directly on the
barrel of the moulding machine or extruder, they can easily be installed
at the side of the machine.
-
 Stable
hopper air-flow.
-
Electronic process temperature control
with digital display.
-
Alarm with digital display.
-
Process thermoregulator with alarm.
-
Working with open circuit up to 140 °C.
-
High head blowers.
-
With hoppers up to 150 litres direct
installation on the machine is advised.
-
With hoppers higher than 150 litres
installation at the side of the machine with re-transport of the
material is advised.
|
